Two-component polysulfide sealant is under liquid polysulfide rubber as the base material from the preparation room temperature vulcanizing capable of self-crosslinking polysulfide sealant, metal and concrete and other materials with good adhesion continued stretching, vibration and temperature maintained under good air tightness and water resistance, and oil resistance, solvent resistance, durability is very good polysulfide sealant (glue) using a 1 construction, sealed surface treatment: the use of lead polysulfide sealant ( To remove the front plastic) construction sticky surface oil, attachments, dust and other debris to ensure sticky surface is dry, smooth to prevent adhesion failure. 2, filling the backing material: according to design requirements, to fill in the joints 3, brushing primer solution: design requires the use of a primer solution works, or long-term flooding parts of the seal, was painted on the primer coating needs to be sticky On the surface, dry film. (With primer liquid, clear when subject to prior purchases) distributor in Guangdong 13530338027 taobao pottery shop 陶居旺 4, formulated sealants: When using polysulfide sealant (glue), press according to the instructions given mixing ratio, The two components are mixed evenly, you can use, whether by hand or machine mix mixing should achieve uniform color without color. Mixing should be to prevent bubble mixing, coating should prevent bubble mixing, compaction, fill seal.